VMM Metering Accessories:
Measuring Lenses:
| Increase Lenses | General increases | Field of view | Numerical aperture | Working distance | Field depth |
| 1:1 | 10 | 20 mm | 0.03 | 88 | 0.3 |
| 2:1 | ' | 10 mm | 0.06 | 85 | 0.08 |
| 5:1 | 50s | 4 mm | 0.13 | 62 | 0.02 |
| 10:1 | Project | 2 mm | 0.20 | 52 | < 0.01 |
| 20:1 | 200 | 1 mm | 0.35 | 30 | 0.002 |
Micro Lenses LEICA Plan Fluor for a metal structure study to view objects in both polarized light and without it
Applies to passing light as well as to the coaxial incident, with a single bayonet support or with a microoptical device, but without an image viewing function in a differential interferencionnom contrast (DIC).
| Lens increase | Overall increase | field of view, MM | Numerical aperture | Working distance, MM | Focus depth, MM |
| 2.5 | X | 8.0 | 0075 | 5.50 | 0.05 |
| 5 | 50 | 4.0 | 0100 | 10.50 | 0.03 |
| 10 | 100 | 2.0 | 0200 | 10.50 | 0.01 |
| 20 | 200 | 1.0 | 0400 | 10.50 | 0.002 |
| 50 | 500 x | 0.4 | 0600 | 3.60 | 0.001 |
| 100 | 1000 | 0.2 | 0700 | 3.60 | 0.0005 |
The micro lenses LEICA Plan Fluor to view images in both polarized light and DIC, and without polarized light and DIC.
Applicable to passing light as well as to a coaxial incident using a microoptical nozzle.
| Lens increase | Overall increase | field of view, MM | Numerical aperture | Working distance, MM | Focus depth, MM |
| 2.5 | X | 8.0 | 0075 | 5.50 | 0.05 |
| 5 | 50 | 4.0 | 0100 | 10.50 | 0.03 |
| 10 | 100 | 2.0 | 0200 | 10.50 | 0.01 |
| 20 | 200 | 1.0 | 0400 | 10.50 | 0.002 |
| 50 | 500 x | 0.4 | 0600 | 3.60 | 0.001 |
| 100 | 1000 | 0.2 | 0700 | 3.60 | 0.0005 |
Measurement software:
qc200
A compact digital reader with a up-down meter and a built-in function calculator to perform quick measurements, but not to process the image.
qc5000
A leader in the software market to perform various kinds of measurements.
Programmable measurement functions:
- Non-manual measurement;
- You do not need to make a mechanical alignment of the sample's work surface through the calculated coordinate conversion;
- Measuring the diameter of the pitch circle from 3 to 50 points;
- A combination of up to 50 measured values allows you to get different geometric elements;
- Cartesian and polar coordinate system
- Preinstallation Feature
OMs
Easy-to-use software from the UHL company; Ideal for measuring source samples and small batches of products
This software is used for laboratory and industrial work, compatible with motorized microscopes and hand-held microscopes.
- To create a combination of geometric shapes in a tree structure
- Easily set measurement points on a video image with a mouse in manual mode
- The result is immediately displayed in the text protocol
- Simple memorization or programming of a sequence of measurements
- Ability to find the edge of an item in automatic mode
- Create rectangular, round, grille, dialog stencils in an image as the measurement limits for quick visual control
IMs
Effective, fully automated integrated software for the measurement of batches of products. Ideal for performing multiple measurements in production.
Functions:
- Fast way to use image processing to perform deep measurements
- A flexible and effective Macro-Speech function for full control of the sequence of measurements with variable subprocesss
- Linking the database and plotting information
- Writing measurement results to the Protocol
- Easy and easy-to-use interface
- A module with a programmable interface for working with remote devices, such as meter probes, laser sensors, etc. Devices
- Redisplay function with different filters
- 3 levels of protection for system installations and calibration
- Quick start of measurement sequence in automatic mode
